Products

Functional masterbatches can be made by adding functional additives to the resin. The produced particles are raw materials for plastic molding processing.

The content of carbon black in the product reaches 2-2.5%, that is: 5-6kg of 40% black masterbatch is added to every 100 kg of raw materials, which far exceeds any anti-aging product, and the...

According to different processes, blow molding can be divided into extrusion blow molding and injection blow molding.

Polyethylene, polyvinyl chloride, polypropylene, polyester, etc. are used for blow molding, and the resulting hollow containers are widely used as industrial packaging containers.

It is widely used in the production process of plastic products such as injection molding, wire drawing, film blowing, and pipe drawing.

The trace moisture contained in the raw materials has a very serious impact on the production of plastic products.

The appearance of the product is of gray-white, good plasticization, uniform particle size, non-toxic, odorless, and non-irritating gas.

If it is not eliminated before film blowing, bubbles or water lines will be formed on the surface of the product, which will have a fatal impact on the strength and appearance of the product.

Black defoamer contains a small percentage of carbon black, which can effectively absorb water and increase the blackness of recycled plastic products.

The trace moisture contained in the raw materials has a very serious impact on the production of plastic products.

Anti moisture masterbatch is also called dehydration additive, dehumidification masterbatch, defoaming masterbatch, and plastic desiccant.

The LLDPE polymer produced by the copolymerization process has a narrower molecular weight distribution than the general LDPE, and has a linear structure that makes it have different rheological...