Products

It could be used directly after mixing the masterbatch and the damp plastic raw material uniformly. For blow molding, the adding ratio is 1%～2%.

If it is not eliminated before film blowing, bubbles or water lines will be formed on the surface, which will have a fatal impact on the strength and appearance of the FILM.

If it is not eliminated before film blowing, bubbles or water lines will be formed on the surface, which will have a fatal impact on the strength and appearance of the FILM.

The surface of calcium oxide is white powder, the impure ones are off-white, with hygroscopicity. There is 40%-80% CAO in desiccant masterbatch.

There are various varieties of NUOSEN red masterbatch, which can be matched according to customer samples or Pantone color number, including ruby red, blood red, orange red, Coca-Cola red,...

HDPE pipes must bear a certain pressure, and PE resins with high molecular weight and good mechanical properties, such as HDPE, should be used.

The blue masterbatch is composed of three basic elements: organic blue pigments or inorganic blue dyes, carriers and additives.

NUOSEN Blue Masterbatch is one of the most common raw materials in the production of chemical barrels.

PE or PP green masterbatch can be used in plastic injection molding, film blowing, round wire and other processes, with good compatibility, uniform dispersion, good durability, high temperature...

The plastic fence is made of PE plastic by blow molding or injection molding, which integrates the toughness of plastic.

There are dozens of models of NUOSEN Green Masterbatch, which are widely used in the injection molding of kitchenware products.

The yellow masterbatch adopts LLDPE carrier and high-quality yellow pigment, and the blown film is shiny, opaque and bright in color.